VIDEO OPTIQUE 12G/6G-SDI UHD (emSFP)

EB12LC2R-MN-P

12G-SDI emSFP+ Optical, Dual Receiver, Non-MSA, PIN, w/o Patho Support

The video SFP EB12LC2R-MN-P is a medium reach optic video SFP with a wide receiver 1270nm through 1610nm
This SFP is specifically designed to support pathological test patterns. This SFP is designed to receive two SDI signals (12G/6G-SDI) over single mode fiber (9um/125um) via LC connectors. The optical receivers inside are SMPTE compliant video.

Highlights:
+ SMPTE ST-297-2015, ST2082 compliant
+ Supports 12G, 6G, 3G, HD, SD-SDI and DVB-ASI
+ Distance up to 20km (tested with 12G-SDI pathological signal)
+ Operating temperature from -5C to 85C
+ Sensitivity better than -13 dBm (tested with 12G-SDI pathological signal)

  • ST2082/ST2081/ST424/ST292/ST259/ST297 compliant
  • LC connector type
  • Control via I2C serial interface includes:
  • • Optical power monitoring
  • • Voltage & temperature monitoring
  • • Module information
  • Hot pluggable and Hot removable with cable/fiber plug in
  • Operating temperatures range from 0C to 70C, contact us for Industrial range
  • Single supply +3.3V
  • 58.5mm x 13.4mm x 8.6mm SFP/SFP+ package
  • High-density and future-proof architecture
  • Superior jitter management and signal regeneration
  • Monitoring and diagnostics at the edge of your product via serial communication
  • Superior link budget performance compares to the ST-297 specification
  • Highest optical performance (fiber stub) and lowest defect rate in the market
  • EB12LC2R-MN-P
    12G-SDI emSFP+ Optical, Dual Receiver, Non-MSA, PIN, w/o Patho Support

DIAGRAMME

EB12LC2R-MN-P Block Diagram

EB12LC2R-MN-P
Demande de soumission Connexion

Fiche technique

EB12LC2R-MN-P Datasheet

Autre documentation technique

EB12LC2R-MN-P (A0h/B0h Register Mapping)

Autre documentation technique

EB12LC2R-MN-P (A2h/B2h Register Mapping)