EB30HD2R-AN2

Composite/SD-SDI emSFP Converter, Dual Receiver, Non-MSA, HD-BNC

This emSFP is designed to decode two composite signals via 75Ω coaxial cables with HD-BNC connectors. The module decodes NTSC/PAL composite inputs and convert them to SD-SDI signal.

** EB30CS2R-AN2 Available with DIN 1.0/2.3 connectors (Minimum Order Quantity may apply, please contact Embrionix_Sales@riedel.net)

SMPTE ST259-C compliant
HD-BNC connectors (75Ω)
Supported Composite Standards:
• NTSC M, NTSC J, NTSC 4.43
• PAL B/G/H/I/D, PAL M, PAL N, PAL 60
Rx Channel:
• 10-bit Composite to SD-SDI video decoder
• 4x Oversampling (54Mhz)
• Test Pattern Generation
Control via I2C serial interface includes:
• Voltage & Temperature Monitoring
• Module Information
• Analog Status and Control registers
Low Power Consumption - typical 1027mW
Single Supply +3.3V
Mechanical compliant with SFF-8431 & SFF-8432

High-density, 2x independent composite converters
Composite legacy support with SDI Non-MSA video SFP cage
Pathological signal support
Superior jitter management and signal regeneration
Monitoring and diagnostics at the edge of your product via serial communication

EB30HD2R-AN2
Composite/SD-SDI emSFP Converter, Dual Receiver, Non-MSA, HD-BNC
EB30CS2R-AN2 (with DIN connectors)
------ Related Accessories ------
EB00CA01-xxA
Coaxial Cable Adaptor, 3G-SDI, DIN 1.0/2.3 Plug (M) to BNC Jack (F), Belden 1855A
EB00CA10-xxA
Coaxial Cable Adaptor, 12G-SDI, HD-BNC Plug (M) to BNC Jack (F), Belden 1855A